pH Buffer
$12.00
HY-GEN® is the mark of guaranteed quality. All calibration and care solutions are made using high quality analytical grade constituents. All formulations and procedures have been prepared under careful supervision by our qualified chemist who has more than 25 years experience.
DESCRIPTION
The ideal pH range for a nutrient solution is typically between 5.8 and 6.5. A pH value above or below this range can increase the likelihood that some nutrients become unavailable to the plant. A pH value of 6.3 typically works well for most plants.
Some electronic meters require a ‘two point’ calibration. pH BUFFER 4 is important as the lower calibration point in the two point calibration process. This will ensure that meters accurately reflect the true reading at the lower end of the range.
DESCRIPTION
pH BUFFER 7 is important as the upper calibration point in the two point’ calibration of electronic meters. Regularly calibrate your pH meter with both pH BUFFER 4 and pH BUFFER 7 calibration solutions to ensure that your meter is operating with precision and accuracy between pH 4 and 7.
Monitor the pH on a daily basis. As plants grow, demand for nutrients increase. This means the pH can fluctuate and therefore should be tested and adjusted to maintain an optimum working nutrient solution. Nutrient requirements vary from plant to plant; therefore the ideal pH varies from plant to plant also.
| Weight | .250 kg |
|---|---|
| Dimensions | 10 × 5 × 10 cm |
| Title | pH Buffer 4, pH Buffer 7 |
Be the first to review “pH Buffer”
Related products
Testing
Bluelab Multimedia pH Metre takes fast and accurate measurements in nutrient solution, soil, coco coir, rock-wool, potting mix and many other media types.
Testing
HY-GEN® COMPLETE pH KIT is an easy and accurate way to keep track of the nutrient solution pH. The kit gives the added ability to adjust your pH using the pH UP and pH DOWN solutions provided. Adjusting the pH is quite easy and after some time and experience it becomes an art as you [...]
Testing
An affordable meter that provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source including LED! FEATURES: PROVIDES ACCURATE PAR LIGHT READINGS FROM ANY LIGHT SOURCE:– Full sun to full shade indoors or outdoors.– Artificial light sources (LED, High Pressure Sodium, Metal Halide,Florescent, Halogen…). THREE MODES OF OPERATION:– Instant Spot Measurement mode [...]
Description BLUELAB PH & CONDUCTIVITY STARTER PACK The ultimate solution for measuring pH, conductivity and temperature on the go Your toolbox contains: Bluelab pH Pen, Bluelab Conductivity Pen, Bluelab Grow Book, Bluelab Probe Care Kit – pH and Conductivity Measure pH, conductivity and temperature in solutions Care, clean and calibrate your products with the Bluelab Probe Care Kit Bluelab pH Pen is easy and fast to calibrate for ongoing accuracy Fully waterproof pens, not [...]
Accessories
Hydroponics Grow Meter Clock (12 or 24 hour) display; Temperature CC or T) display; Humidity display; Calendar display; Minimum/maximum temperature and humidity display; Quarter bell with hourly chime function;
Testing
Conductivity Meter also been called as Conductivity Tester or EC meter, it’s the device that measure the value of Conductivity in liquid. TDS Meter also been called as TDS Tester or ppm meter, it’s the device that measure the value of Total dissolved solids (TDS) in liquid, both had been widely used in the Water Quality Testing applications. AZ8362 Conductivity & TDS Pen was being [...]
Testing
Description No longer is there a need to purchase separate meters, with the new dual-purpose Bluelab Multimedia pH Meter you can measure pH directly in the root-zone across different media, and nutrient solution. What’s more, the new Bluelab Leap pH Probe, which comes with the new Bluelab Multimedia pH Meter, delivers a fast sensor response so growers get each pH result [...]
Reviews
There are no reviews yet.